Post by Admin on Jul 13, 2017 7:37:28 GMT
www.tratauto.com
DESCRIPTION
A highly concentrated product, formulated for cleaning all type of residues (except oil) incrusted in the radiator and cooling system.
WHAT DOES IT DO?
State-of-the-art components that remove limescale, stir and clean dirt in all types of radiators and elements that make up a cooling system.
WHEN SHOULD IT BE USED?
FOR:
Stirring, cleaning, dissolving and eliminating all kinds of sediment
Re-establishing the proper temperature exchange between the radiator/engine and components.
INSTRUCTIONS FOR USE
With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator
Add the contents of the product
Replace the cap on the expansion tank/radiator
Start the engine and wait until it has heated to running temperature
Leave the engine idle for 30 minutes
Switch off the engine and wait until the temperature and pressure in the circuit have reduced
Empty the circuit and rinse with abundant water until the last residues have been eliminated
Fill the circuit with anti-freeze /coolant with the proportions recommended by the manufacturer
Replace the cap on the expansion tank/radiator.
Must be performed by a professional expert
WARNING REGARDING USE
Because it does not contain abrasive elements, it can be used in any type of engine without any risk of damage.
COMPATIBLE
Compatible with any type of anti-freeze/coolant.
515 Radiator Stop Leak
249 Cooling System Degreaser
492 CER-MET Permanent Block & Radiator Seal
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole cooling system:
1 year - 50,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
Reference: 843654897539
Capacity: 300 ml.
Units in Box: 15
DESCRIPTION
A highly concentrated product, formulated for cleaning all type of residues (except oil) incrusted in the radiator and cooling system.
WHAT DOES IT DO?
State-of-the-art components that remove limescale, stir and clean dirt in all types of radiators and elements that make up a cooling system.
WHEN SHOULD IT BE USED?
FOR:
Stirring, cleaning, dissolving and eliminating all kinds of sediment
Re-establishing the proper temperature exchange between the radiator/engine and components.
INSTRUCTIONS FOR USE
With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator
Add the contents of the product
Replace the cap on the expansion tank/radiator
Start the engine and wait until it has heated to running temperature
Leave the engine idle for 30 minutes
Switch off the engine and wait until the temperature and pressure in the circuit have reduced
Empty the circuit and rinse with abundant water until the last residues have been eliminated
Fill the circuit with anti-freeze /coolant with the proportions recommended by the manufacturer
Replace the cap on the expansion tank/radiator.
Must be performed by a professional expert
WARNING REGARDING USE
Because it does not contain abrasive elements, it can be used in any type of engine without any risk of damage.
COMPATIBLE
Compatible with any type of anti-freeze/coolant.
515 Radiator Stop Leak
249 Cooling System Degreaser
492 CER-MET Permanent Block & Radiator Seal
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole cooling system:
1 year - 50,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
Reference: 843654897539
Capacity: 300 ml.
Units in Box: 15