Post by Admin on Jul 13, 2017 7:40:21 GMT
www.tratauto.com
DESCRIPTION
Treatment formulated for eliminating varnishes, sludge and solid remains from all the internal engine parts.
WHAT DOES IT DO?
It contains special additives that treat, dissolve and clean varnishes, deposits and residues in only 5 minutes.
Does not damage gaskets or oil seals.
WHEN SHOULD IT BE USED?
FOR:
Eliminating and cleaning all type of residues and sediment from combustion
Increasing the air-tightness of cylinders
Restoring compression losses
Cleaning carbonised segments
Engines with high mileage
Engines that were not serviced when they reached the recommended mileage or time
INSTRUCTIONS FOR USE
Start the engine and wait until it reaches running temperature
Switch off the engine and remove the oil filler cap
Add the contents of the product
Replace the oil filler cap
Switch on the engine and leave it idle for a MAXIMUM OF 5 MINUTES
Switch off the engine and extract the oil through the lower crankcase.
Must be performed by a professional expert
WARNING REGARDING USE
For turbo engines that need a replacement due to breakage we recommend you carry out the cleaning process twice.
COMPATIBLE
Compatible with all engines and oils.
454 MT2000 Synthetic Metal Treatment
447 Oil Stop Leak
089 Smoke Eliminator
157 Hydraulic Valves
448 Compression Motor
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole lubrication system:
2 years - 45,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
For extra protection, combine with MT2000 Synthetic Metal Treatment.
Reference: 843654897577
Capacity: 300 ml.
Units in Box: 15
DESCRIPTION
Treatment formulated for eliminating varnishes, sludge and solid remains from all the internal engine parts.
WHAT DOES IT DO?
It contains special additives that treat, dissolve and clean varnishes, deposits and residues in only 5 minutes.
Does not damage gaskets or oil seals.
WHEN SHOULD IT BE USED?
FOR:
Eliminating and cleaning all type of residues and sediment from combustion
Increasing the air-tightness of cylinders
Restoring compression losses
Cleaning carbonised segments
Engines with high mileage
Engines that were not serviced when they reached the recommended mileage or time
INSTRUCTIONS FOR USE
Start the engine and wait until it reaches running temperature
Switch off the engine and remove the oil filler cap
Add the contents of the product
Replace the oil filler cap
Switch on the engine and leave it idle for a MAXIMUM OF 5 MINUTES
Switch off the engine and extract the oil through the lower crankcase.
Must be performed by a professional expert
WARNING REGARDING USE
For turbo engines that need a replacement due to breakage we recommend you carry out the cleaning process twice.
COMPATIBLE
Compatible with all engines and oils.
454 MT2000 Synthetic Metal Treatment
447 Oil Stop Leak
089 Smoke Eliminator
157 Hydraulic Valves
448 Compression Motor
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole lubrication system:
2 years - 45,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
For extra protection, combine with MT2000 Synthetic Metal Treatment.
Reference: 843654897577
Capacity: 300 ml.
Units in Box: 15