Post by Admin on Jul 13, 2017 7:36:06 GMT
www.tratauto.com
DESCRIPTION
Improved formula with a ceramic-metal base for permanently sealing leaks in the cooling system.
WHAT DOES IT DO?
Seals any crack (2 mm) by means of temperature and pressure. Suitable for radiators, cylinder head and block.
WHEN SHOULD IT BE USED?
FOR:
PERMANENTLY sealing leaks in radiators made of copper, brass, aluminium and plastic
Sealing microcracks in cylinder heads made of cast iron, steel and aluminium
Sealing leaks in heating radiators
Reducing the consumption of anti-freeze lost by evaporation in engines that work at high temperatures
Sealing critical points of the radiator, such as: plastic-metal joints, creases and vertices.
INSTRUCTIONS FOR USE
It is IMPORTANT to shake the container until the components have mixed together perfectly
With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator
Add the contents of the product and replace the cap on the expansion tank/radiator
Start the engine and wait until it has heated to running temperature
Check the leak has been sealed properly.
Must be performed by a professional expert
WARNING REGARDING USE
Make sure the circuit is clean.
COMPATIBLE
Compatible with any type of anti-freeze/coolant.
515 Radiator Stop Leak
539 Radiator Flush
249 Cooling System Degreaser
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole cooling system:
1 year - 50,000 Km
Add the product as a preventive measure:
Not Present
Use only in clean circuits
Reference: 843654897492Capacity: 236 ml.Units in Box: 15
DESCRIPTION
Improved formula with a ceramic-metal base for permanently sealing leaks in the cooling system.
WHAT DOES IT DO?
Seals any crack (2 mm) by means of temperature and pressure. Suitable for radiators, cylinder head and block.
WHEN SHOULD IT BE USED?
FOR:
PERMANENTLY sealing leaks in radiators made of copper, brass, aluminium and plastic
Sealing microcracks in cylinder heads made of cast iron, steel and aluminium
Sealing leaks in heating radiators
Reducing the consumption of anti-freeze lost by evaporation in engines that work at high temperatures
Sealing critical points of the radiator, such as: plastic-metal joints, creases and vertices.
INSTRUCTIONS FOR USE
It is IMPORTANT to shake the container until the components have mixed together perfectly
With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator
Add the contents of the product and replace the cap on the expansion tank/radiator
Start the engine and wait until it has heated to running temperature
Check the leak has been sealed properly.
Must be performed by a professional expert
WARNING REGARDING USE
Make sure the circuit is clean.
COMPATIBLE
Compatible with any type of anti-freeze/coolant.
515 Radiator Stop Leak
539 Radiator Flush
249 Cooling System Degreaser
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole cooling system:
1 year - 50,000 Km
Add the product as a preventive measure:
Not Present
Use only in clean circuits
Reference: 843654897492Capacity: 236 ml.Units in Box: 15