Post by Admin on Jul 13, 2017 9:28:00 GMT
www.tratauto.com
DESCRIPTION
Formulated for sealing micro leaks throughout the whole air conditioning system
Includes UV leak detector. Does not contain polymer-based components; therefore it does not crystallise or obstruct elements in the system. Can be safely used in gas recovery machines; it can be recovered without the risk of obstructions.
WHAT DOES IT DO?
It forms a thin layer all over the system, sealing small leaks or pores, without varying the convection or heat exchange.
Lubricates and vitalises all the components in the system.
WHEN SHOULD IT BE USED? - FOR:
Permanently sealing micro leaks situated in evaporators, condensers, hoses and rubber joints
Revitalising joints and other components of the system
Detecting leaks
INSTRUCTIONS FOR USE
Recycle the cooling gas
Empty the circuit
Screw the hose onto the container, making sure the tip of the valve does not prematurely perforate the seal
Purge the hose with the contents of the products before attaching it to the circuit
Quickly attach the corresponding connector to the lower valve (L) of the circuit
Turn the key clockwise to perforate the seal of the container and then turn in the opposite direction to empty the contents.
Hold the container upside down and shake.
When the container has emptied, disconnect the hose in this order: 1) from the circuit inlet (L) and 2) from the container
Load the cooling gas according to the values given by the manufacturer, subtracting the net weight of the contents of the product
Start the engine and switch on the air conditioning system to maximum for 20 minutes
Vehices loaded from above: Follow the previous steps with the engine switched on using the high adaptor (H).
Must be performed by a professional expert
WARNING REGARDING USE
In exceptional cases, the product can be added after the load, with the engine running and never from above
DO NOT ATTACH THE HOSE TO THE HIGH PRESSURE INLET WITH THE ENGINE SWITCHED ON.
Range of concentration: It can treat systems with a load of up to 1200 gr, with one or two evaporators
The hose cannot be used again
COMPATIBLE
Compatible with mineral type oils / Ester / PAG. Only for R-134ª
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Service the whole air conditioning system:
2 years - 30,000 Km
Add the product as a preventive measure:
1 year - 15,000 Km
Reference: 843654897164
Capacity: 113 gr.
Units in Box: 12
DESCRIPTION
Formulated for sealing micro leaks throughout the whole air conditioning system
Includes UV leak detector. Does not contain polymer-based components; therefore it does not crystallise or obstruct elements in the system. Can be safely used in gas recovery machines; it can be recovered without the risk of obstructions.
WHAT DOES IT DO?
It forms a thin layer all over the system, sealing small leaks or pores, without varying the convection or heat exchange.
Lubricates and vitalises all the components in the system.
WHEN SHOULD IT BE USED? - FOR:
Permanently sealing micro leaks situated in evaporators, condensers, hoses and rubber joints
Revitalising joints and other components of the system
Detecting leaks
INSTRUCTIONS FOR USE
Recycle the cooling gas
Empty the circuit
Screw the hose onto the container, making sure the tip of the valve does not prematurely perforate the seal
Purge the hose with the contents of the products before attaching it to the circuit
Quickly attach the corresponding connector to the lower valve (L) of the circuit
Turn the key clockwise to perforate the seal of the container and then turn in the opposite direction to empty the contents.
Hold the container upside down and shake.
When the container has emptied, disconnect the hose in this order: 1) from the circuit inlet (L) and 2) from the container
Load the cooling gas according to the values given by the manufacturer, subtracting the net weight of the contents of the product
Start the engine and switch on the air conditioning system to maximum for 20 minutes
Vehices loaded from above: Follow the previous steps with the engine switched on using the high adaptor (H).
Must be performed by a professional expert
WARNING REGARDING USE
In exceptional cases, the product can be added after the load, with the engine running and never from above
DO NOT ATTACH THE HOSE TO THE HIGH PRESSURE INLET WITH THE ENGINE SWITCHED ON.
Range of concentration: It can treat systems with a load of up to 1200 gr, with one or two evaporators
The hose cannot be used again
COMPATIBLE
Compatible with mineral type oils / Ester / PAG. Only for R-134ª
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Service the whole air conditioning system:
2 years - 30,000 Km
Add the product as a preventive measure:
1 year - 15,000 Km
Reference: 843654897164
Capacity: 113 gr.
Units in Box: 12