Post by Admin on Jul 13, 2017 9:26:26 GMT
www.tratauto.com
DESCRIPTION
A dielectric contact aerosol cleaner with special features. Universal use.
A basic tools for garages, industry, nautical…
WHAT DOES IT DO?
A formula with proven efficiency for cleaning, degreasing and protecting all types of electrical or electronic elements.
WHEN SHOULD IT BE USED?
FOR:
Cleaning and eliminating residues in fuse boxes, diagnosis, alternators, starting motors, coils, connectors, fuses and any other type of electrical or electronic equipment.
Removing humidity from any type of surface on which it is applied. Special features as a dielectric. Can be used with voltages of <= 30 Kv.
Re-establishing the optimum contact and protecting against humidity in equipment that is subject to extreme operational conditions.
Repairing or checking electrical and electronic parts which require a contact cleaner that evaporates quickly without leaving residues.
Cleaning and servicing tools, electrical and electronic equipment, fuse boxes, diagnosis, alternators, starting motors…
INSTRUCTIONS FOR USE
Disconnect the electrical systems before applying.
Shake the container and generously spray over the parts to be treated until the humidity has been dried or the dirt has disappeared.
Leave to dry and connect the electrical part again.
Can be sprayed in any position; it is not a conductor; does not leave residues.
WARNING REGARDING USE
During the treatment it is normal if the following are noticed:
Characteristic smells
Leaves a stain
COMPATIBLE
All in 1 – Super MultiUse
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Use in connectors, in each diagnosis carried out in the garage, dismantlement and repair of electronic systems.
Preventive:
In parts and pieces that require special insulation from humidity in garages, homes,
industry, nautical and building work.
Reference: 843654897423
Capacity: 300 ml.
Units in Box: 15
DESCRIPTION
A dielectric contact aerosol cleaner with special features. Universal use.
A basic tools for garages, industry, nautical…
WHAT DOES IT DO?
A formula with proven efficiency for cleaning, degreasing and protecting all types of electrical or electronic elements.
WHEN SHOULD IT BE USED?
FOR:
Cleaning and eliminating residues in fuse boxes, diagnosis, alternators, starting motors, coils, connectors, fuses and any other type of electrical or electronic equipment.
Removing humidity from any type of surface on which it is applied. Special features as a dielectric. Can be used with voltages of <= 30 Kv.
Re-establishing the optimum contact and protecting against humidity in equipment that is subject to extreme operational conditions.
Repairing or checking electrical and electronic parts which require a contact cleaner that evaporates quickly without leaving residues.
Cleaning and servicing tools, electrical and electronic equipment, fuse boxes, diagnosis, alternators, starting motors…
INSTRUCTIONS FOR USE
Disconnect the electrical systems before applying.
Shake the container and generously spray over the parts to be treated until the humidity has been dried or the dirt has disappeared.
Leave to dry and connect the electrical part again.
Can be sprayed in any position; it is not a conductor; does not leave residues.
WARNING REGARDING USE
During the treatment it is normal if the following are noticed:
Characteristic smells
Leaves a stain
COMPATIBLE
All in 1 – Super MultiUse
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Use in connectors, in each diagnosis carried out in the garage, dismantlement and repair of electronic systems.
Preventive:
In parts and pieces that require special insulation from humidity in garages, homes,
industry, nautical and building work.
Reference: 843654897423
Capacity: 300 ml.
Units in Box: 15