Post by Admin on Jul 13, 2017 7:39:25 GMT
www.tratauto.com
DESCRIPTION
A product used for re-establishing the good performance of hydraulic valves in all types of engines.
WHAT DOES IT DO?
Cleans and eliminates remains of oil and carbon deposit.
It guarantees the hydraulic valves (valve tappets) are loaded correctly.
It does not change the colour, density and volume of the oil.
Does not damage gaskets or oil seals.
WHEN SHOULD IT BE USED?
FOR:
Effectively reducing the noise of hydraulic valves (valve tappets) with a cold engine
Dissolving dirt, residues and varnishes inside the lubrication channels
Engines with excessive wear or mileage
It does not affect the correct performance of catalytic converters or particulate filters.
INSTRUCTIONS FOR USE
With the engine switched off, remove the oil filler cap
Add the contents of the product
Replace the oil filler cap.
WARNING REGARDING USE
Acts progressively, which means effective results are obtained after 500 km
Apply preferably when changing the oil.
COMPATIBLE
Compatible with all engines and oils.
454 MT2000 Synthetic Metal Treatment
447 Oil Stop Leak
089 Smoke Eliminator
577 Motor Flush
448 Compression Motor
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole lubrication system:
2 years - 45,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
For extra protection, combine with MT2000 Synthetic Metal Treatment.
Reference: 843654897157
Capacity: 300 ml.
Units in Box: 15
DESCRIPTION
A product used for re-establishing the good performance of hydraulic valves in all types of engines.
WHAT DOES IT DO?
Cleans and eliminates remains of oil and carbon deposit.
It guarantees the hydraulic valves (valve tappets) are loaded correctly.
It does not change the colour, density and volume of the oil.
Does not damage gaskets or oil seals.
WHEN SHOULD IT BE USED?
FOR:
Effectively reducing the noise of hydraulic valves (valve tappets) with a cold engine
Dissolving dirt, residues and varnishes inside the lubrication channels
Engines with excessive wear or mileage
It does not affect the correct performance of catalytic converters or particulate filters.
INSTRUCTIONS FOR USE
With the engine switched off, remove the oil filler cap
Add the contents of the product
Replace the oil filler cap.
WARNING REGARDING USE
Acts progressively, which means effective results are obtained after 500 km
Apply preferably when changing the oil.
COMPATIBLE
Compatible with all engines and oils.
454 MT2000 Synthetic Metal Treatment
447 Oil Stop Leak
089 Smoke Eliminator
577 Motor Flush
448 Compression Motor
RECOMMENDATIONS AND MAINTENANCE
Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:
Clean and service the whole lubrication system:
2 years - 45,000 Km
Add the product as a preventive measure:
1 year - 30,000 Km
For extra protection, combine with MT2000 Synthetic Metal Treatment.
Reference: 843654897157
Capacity: 300 ml.
Units in Box: 15